DANIBRUM PM4 industrial 6-axis 623-sided machining machine

Industrial 4-axis 6-sided machining machine

Equipped with 6 independent axes, high-power motors and an advanced inverter-controlled feed system, it ensures high productivity, perfect finishes and stability in intensive operation.

Equipped with a direct feed system with a 5.5 kW motor, inverter-controlled, with adjustable speed between 6–36 m/min, a chainless cardan-shaft transmission, and industrial-profile feed rollers that ensure constant traction even with wet or hard wood or with irregular sections.

Areas of application:

• Flooring
• LADDER
• Wooden constructions
• Decorative wooden profiles
• Timber
• Parquet
• Solid wood doors and windows
• Structural panels
• Solid wood furniture
• KITCHENS

Technical specifications:

• Solid cast body → stability, high-precision flat machining
• Anti-vibration and anti-torsion design
• Fully machined casing 5-axis CNC center
• FAG high-speed bearings, main shaft at 8000 rpm
• Dust cover – protects bearings
• Schneider Electric electrical components (France)
• Inverter feed motor (6–36 m/min)
• Heat-treated movable and fixed table
• Serrated active rollers for stable feeding
• Press rollers with special profile
• Chainless transmission – via cardan shaft
• Heavy and precise guide rollers
• Heat-treated surface for stability
• Feed rollers driven from the inside (bottom tooth)
• Wear plates treated for durability
• Adjustable guides depending on the cutter diameter (112–250 mm)
• Efficient suction: 6 holes Ø150 mm, air speed: 30–40 m/s
• Centralized lubrication system (automatic + manual) for:
  • ax
  • pressure rollers
  • work surfaces
• Electric height adjustment
• Pneumatically adjustable pressure rollers
• Safety limiter at the entrance
• Lateral pressure devices with graduated ruler
• Anti-kickback devices and total protection

Special features and amenities

• Worktable adjustment for optimal support according to the milling head diameter
• Electric height adjustment system for feed
• Spring-loaded pressure rollers at the feed
• Side pressing device synchronized with the left axis
• Worktable and ruler with hard chrome coating + special treatment for guide plates
• Centralized lubrication for front, middle and rear tables
• Centralized lubrication system
• Pneumatic cylinder feed rollers
• Electric housing lift/lower
• Feed speed adjustment via inverter
• Movable side rollers on the work table
• Safety limiter at the feed opening
• Protective hood
• Emergency stop when door is opened
• Safety device for checking air pressure
• Emergency stop button at the exit

Additional options (on request)

• Automatic digital display DP525
• Automatic feeding system
• Automatic evacuation system
• Automatic palletizing system
• Fully integrated system

Machine structure

• Robust machine frame, with a solid structure, high-precision flat machining and special damping and torsion resistance design, ensures more stable operation and maintains high processing quality.
• Extremely high machining accuracy: after the aging treatment of the frame, it is fully machined in a single operation by a high-precision German 5-axis machining center, thus guaranteeing the dimensional accuracy of the machine.

High quality tree

• Extremely stable operation ensures a excellent surface finish of the final product.
• High-precision spindle, equipped with heavy bearings, operates stably even under demanding working conditions, maintaining a remarkable surface smoothnessIn addition, it is equipped with a special dust protection cap, which prevents sawdust from entering and extends the life of the bearings.

Direct drive feed motor

• The direct drive, inverter controlled feed motor provides strong and constant power, without power losses caused by mechanical slippage.
• The feeding speed is controlled by frequency converter., allowing precise adjustment according to the actual requirements of the machining process.
• Speed ​​adjustment range: 6–36 meters/minute.

Solid feeding and unloading table

• The movable feeding table and the fixed table at the rear are subjected to a integral heat treatment, to ensure best material stability during processing.
• ALL work table and guide rail are covered by special paint treatment, offering excellent wear resistance and high stability in use.

Feeding and pressing

• Optimized feeding and pressing system, designed for maximum reliability:
• The pressure rollers are provided with special toothed profiles, and the drive rollers can be mounted flexibly, ensuring a constant and reliable transmission of each material.
• The reducer is heavy, high-speed and high-torque, incorporated into a massive cast housing.
• The transmission is done through cardan shaft without chain, reducing wear and increasing stability.
• The standard power supply system allows you to precisely adjust the feed rate according to needs, thus guaranteeing precision of wood surface processing.

Side pressing device

• The device lateral pressing at the entrance is equipped with graduated ruler, allowing quick and precise adjustments.

Sequential feed limiter

• At the material inlet, the machine is equipped with a limiter for sequential feeding, which stops the feed automatically if the thickness of the part exceeds the allowed limit, preventing equipment damage and ensuring operational safety.

Active lower cylinder

• The feeding worktable is equipped with a active lower cylinder, equipped with teeth, which offers a powerful drive system, ensuring smooth and efficient introduction of wood into the main machine.

Lower axle protection

• On top the first lower axis is mounted safety protection cap, which is moves synchronously with the left vertical axis, ensuring operator protection and adaptability during adjustments.

Auxiliary device for short parts

• Auxiliary device for short parts from the right vertical axis reduces the distance between the two pressure rollers, ensuring a firm fixation of the material and preventing the wood jump, which could affect the quality of processing.
• It also allows machining of short parts and it can be quickly raised, facilitating easy tool replacement on the vertical spindle.

Side guide rails

• The guide rails on the back the first and second straight vertical axes can be adjusted laterally, depending on milling head size and type of material, to ensure processing accuracy.

Pneumatic cylinder for efficient pressing

• The lateral pressing device in front of the left vertical axis is equipped with pneumatic cylinder, which ensures a uniform pressure on the material.
• Front and rear pressing devices moves synchronously with the left axis, what makes make car adjustments faster and easier.

Movable work surface for improved stability

• The working surfaces of the left/right vertical axes can be adjusted according to the size of the milling head, offering maximum support of the workpiece during processing.
• The outer diameter of rotation of the tools for the vertical left/right axes can reach 112--250mm, being ideal for large-scale depth profiling, specific to styles European, American, furniture fully customized or wooden doors.

Processing capabilities for all markets

• The front pressing device of upper shaft uses a pneumatic cylinder, ensuring a balanced and stable pressure, while the rear pressing device is of the type with spring.
• so much front pressure roller, and also the latter can be adjusted according to the size of the milling head, and the tool rotation diameter for the upper spindle can reach 112--250mm.
• This configuration allows deep and large surface millings, being ideal for European or American furniture, fully customized furniture, ears, windows and other wooden products.

Lower exhaust hood

• Extractor hood left vertical axis is of type internal, mounted at the bottom, what makes installation and adjustment of tools to be much faster and more convenient.

Active mass-integrated rollers

• The active rollers integrated into the worktable allow safe and smooth feeding of wood into the machine, even in the case of wood with high humidity or hardwood.
• Another benefit of this system is reducing worktable wear, thus extending the life of the equipment.

Centralized lubrication system

• The centralized lubrication system, designed specifically for this machine, ensures easy maintenance and fast and convenient operation, contributing to the efficient and sustainable operation of the machine.
• so much lifting the press crossbar, and also lifting the main shaft have access to this centralized lubrication system, what makes maintenance should be simpleand use should be fast and convenient.

Various feed rollers

• Heavy duty upper feed rollers ensures a firm grip on the wood, guaranteeing a feeding process perfect and stable during four-sided planing.
• Depending on the type of wood and the surface quality requirements, feed rollers can be supplied with adapted contact materials – so as to obtain a impeccable workmanship, without traces or defects.

Example